Scaffolding refers to the construction site for the construction of workers to operate and solve the vertical and horizontal transportation of a variety of supports, is an indispensable temporary facility in the construction of the building, at the same time, scaffolding also belongs to one of the more dangerous engineering construction. Many engineers are also unclear about the erection standards of scaffolding, which can easily cause safety accidents.

Today's scaffolding safety standard atlas, a total of 90 pages, including floor-mounted scaffolding, cantilevered scaffolding, etc., detailed content, three-dimensional image, construction details and standards are clear and decent, very comprehensive.

directory
1. Floor-mounted scaffolding

Second, cantilevered scaffolding

3. Gantry scaffolding

Fourth, attached lifting scaffolding

5. Horizontal cantilever protective shed

Floor-mounted scaffolding
The foundation of the erection frame must be flat and solid, and there must be sufficient bearing capacity; There shall be no standing water in the erection site.

Cantilevered scaffolding
The cantilever beam of the load-bearing or master's cantilever scaffold shall be made of section steel with biaxial symmetrical section, and the cross-sectional height of the steel beam shall not be less than 160mm.

Frame foundation
The outer side of the frame should be closed with a dense safety net, and the connection between the nets should be tight. Horizontal safety nets should be used under the scaffold board of the working layer, and horizontal safety nets should be used to close every 10m below.